Microscopy
Scanning Electron Microscope (SEM) with EDS
High-resolution imaging and elemental analysis of material surfaces.
Our Testing Instruments
Advanced instruments for accurate and reliable material testing.
Instrument Catalogue
Thermal
TA SDT 650 Simultaneous Thermal Analyzer
Measures weight change and heat flow in a sample as it is heated.
Mechanical
Universal Testing Machine
Applies controlled load for tensile, compression, flexural and shear tests.
Hardness
Micro Vickers Hardness Tester
Measures hardness over very small areas using a diamond indenter.
Hardness
Shore A Rubber Hardness Tester
Measures the indentation hardness of rubbers and soft elastomers.
Microscopy
Inverted Trinocular Metallurgical Microscope
Examines the microstructure of polished and etched metal samples.
Microscopy
Stereo / Digital Microscope
Low-magnification examination and imaging of surfaces and fractures.
Surface & Corrosion
Contact Angle Measurement System
Measures how a liquid drop sits on a surface to assess wettability.
Surface & Corrosion
Potentiostat / Galvanostat (Electrochemical Workstation)
Runs electrochemical tests to study corrosion behaviour of metals.
Surface & Corrosion
Salt Spray Test Chamber
Exposes samples to a salt fog to compare their corrosion resistance.
Surface & Corrosion
Surface Roughness Tester
Measures the roughness of a machined or finished surface.
Surface & Corrosion
Pin / Ball-on-Disc Wear Test Machine
Measures friction and wear between a pin or ball and a rotating disc.
Mechanical
Micro UTM
Applies small, controlled loads to test small and thin specimens in tension, compression and bending.
Have a Material Testing Requirement?
Tell us about your sample and testing objective, and our team will help you decide the appropriate next step.